How much should a pressure washer charge?

The cost a pressure washer should charge depends on several factors including location, the size of the job, and the type of service required. On average, pressure washing professionals charge between $0.10 and $0.50 per square foot for residential properties, while commercial rates may be higher due to larger areas and specialized equipment. For more specialized tasks like roof or deck cleaning, prices may range from $200 to $500 or more. Labor rates generally range from $50 to $150 per hour, depending on the complexity of the project. Always ensure the professional has the proper licenses and insurance for safety. It’s also wise to ask for an upfront estimate before committing to any work. Remember, when considering costs, quality matters; hiring a low-cost, inexperienced pressure washer may result in poor results or property damage. Always check reviews and references to ensure the professional can provide effective and safe power washing.

What is the national average cost for pressure washing?

The national average cost for pressure washing varies based on the scope of the project and the size of the area being cleaned. Generally, homeowners pay between $250 and $500 for professional pressure washing services. For basic tasks like cleaning driveways or siding, prices usually range from $0.10 to $0.50 per square foot. Larger areas like commercial buildings or multi-story homes can increase costs, often requiring specialized equipment. For example, cleaning a typical driveway may cost between $100 and $200, while washing a home’s exterior can run between $200 and $600. Power washing prices may also vary depending on the type of surfaces being cleaned—wood, concrete, brick, and stucco require different pressure levels and techniques. For accurate pricing, consider getting several quotes from reputable companies to compare rates and service quality. While pricing is important, it’s also essential to choose a professional pressure washing company with experience to avoid potential damage to your property.

What is the difference between power washing and pressure washing?

The primary difference between power washing and pressure washing lies in the use of heated water. While both use high-pressure water to clean surfaces, power washing utilizes hot water, which helps break down tougher dirt, grime, mold, and mildew, making it more effective for certain types of surfaces like concrete or heavily soiled areas. Pressure washing, on the other hand, uses cold water, which is typically sufficient for cleaning lighter surface dirt and debris. The heated water in power washing is ideal for areas that require a deep clean, such as oil stains, graffiti, or algae on roofs. Both techniques are equally effective when used correctly but serve different purposes. For sensitive surfaces like painted wood or windows, pressure washing may be more suitable as it avoids the risk of damaging the material with extreme heat. When hiring a professional, make sure they use the appropriate method for your cleaning needs to ensure the best results without harming your property.

How much does pressure washing cost in my area?

Pressure washing prices vary significantly depending on the region, the scope of the job, and the company you hire. On average, pressure washing can cost between $0.10 and $0.50 per square foot across most areas. However, in larger cities or areas with higher demand for power washing, prices may be slightly higher. Factors that influence cost include the size of the area to be cleaned, the type of surface (e.g., concrete, wood, brick), and any special considerations like access issues or environmental hazards. In certain areas, you may find higher rates for commercial properties or multi-story buildings, as they require more advanced equipment or safety measures. To determine an accurate price for pressure washing in your area, it’s always recommended to request quotes from local professionals. Be sure to ask if there are any additional fees for things like specialized treatments or chemicals used in cleaning, as these can increase the final cost.

How long does it take to pressure wash a 2000 sq ft house?

Pressure washing a 2000 sq ft house typically takes between 3 to 5 hours, depending on several factors. These include the complexity of the job, the type of surfaces being cleaned, and the level of dirt or staining on the exterior. For instance, cleaning a home with simple vinyl siding might take less time than a house with more intricate features or a higher buildup of grime. Additionally, the presence of landscaping, the number of floors, and the need for specialized treatments (such as soft washing for delicate surfaces) can affect the overall duration. The pressure washing professional may also need to spend additional time setting up equipment, preparing the area, and ensuring that all areas are thoroughly cleaned without causing damage. For accurate timing, it’s best to discuss your needs directly with the pressure washing service to get a more specific estimate based on your home’s layout and condition.

How to quote power washing?

Quoting power washing services requires a comprehensive approach to ensure accuracy and fairness for both the client and the service provider. First, the professional will assess the size of the area to be cleaned, which is typically measured in square feet. The type of surface—whether it’s concrete, wood, or another material—also plays a significant role in determining the quote. Some surfaces may require more pressure or special cleaning solutions, which can increase the cost. Additionally, the level of dirt or staining, such as mold or oil stains, can affect the time and equipment needed to clean the area properly. For example, power washing a driveway may cost more if the surface has built-up oil stains or grease. Finally, factors like accessibility, the height of the area, and any specific client requests (e.g., using eco-friendly cleaning solutions) should be factored into the quote. A thorough on-site inspection and detailed consultation with the client are essential for providing an accurate price.

Is pressure washing safe for my home?

When done correctly, pressure washing is a safe and effective way to clean your home’s exterior. However, it’s important to hire a skilled professional who understands the proper techniques and pressure levels required for different surfaces. Too much pressure can damage siding, windows, and other delicate areas. A trained pressure washing technician will use the appropriate pressure for various surfaces, and for sensitive areas like painted wood or roofing, they may employ soft washing techniques to avoid damage. Additionally, power washing requires knowledge of the right chemicals to use for different stains (e.g., mold, mildew, algae). If done improperly, these chemicals can cause harm to plants or the environment. Hiring an experienced pressure washing company ensures that your home is cleaned thoroughly and safely, preventing the risk of damage or injury.

How often should I get my home pressure washed?

The frequency of pressure washing depends on the environment and the type of exterior material. On average, most homeowners should have their homes pressure washed every 1-2 years. However, if your home is in an area with high humidity, heavy rainfall, or frequent dust storms, you may need to clean it more often to remove mold, algae, or accumulated dirt. Specific areas such as decks, driveways, and gutters might require more frequent cleaning to maintain their appearance and structural integrity. Regular washing helps preserve the material’s longevity by removing damaging substances like mold, mildew, and dirt buildup that can wear down surfaces over time. If you’re unsure how often to schedule washing, a professional pressure washing service can assess your home’s exterior and provide guidance based on the conditions of your property.

Can pressure washing damage my driveway?

Pressure washing is generally safe for concrete, asphalt, and other common driveway materials, as long as the appropriate pressure level is used. High-pressure washing can damage surfaces if it’s not done properly, particularly if the pressure is too intense or the nozzle is too close to the surface. This could lead to surface pitting, cracking, or removing protective coatings. For instance, concrete driveways are more porous and susceptible to damage, so a lower pressure setting or a wide spray pattern is often recommended. Additionally, for older driveways with weakened surfaces or cracks, pressure washing should be done carefully to avoid exacerbating the damage. To ensure safety, it’s recommended to hire a professional pressure washing company who can adjust the pressure according to the condition and material of your driveway, ensuring a thorough cleaning without causing damage.

Does pressure washing remove mold and mildew?

Yes, pressure washing is an effective way to remove mold and mildew from many surfaces. The high-pressure water stream helps to dislodge and wash away mold and mildew buildup. However, power washing may be required for stubborn or deeply embedded stains, as it uses hot water that breaks down the mold more effectively. For surfaces like wood, which are more susceptible to damage, a softer washing technique may be used along with a specialized cleaning solution that targets mold and mildew. The use of mold-inhibiting chemicals can also help prevent regrowth. It’s important to address mold and mildew issues quickly, as they can cause damage to surfaces and pose health risks. Hiring a professional pressure washing service ensures that mold and mildew are properly removed without causing damage to your home or landscaping.

What Do Most Cleaners Charge Per Hour in Winston-Salem, NC? Sully's Pressure Washing Has the Answer

When considering professional cleaning services, one of the most common questions homeowners and business owners in Winston-Salem, NC, ask is: “How much does it cost per hour?” Whether you’re looking to have your windows gleaming, your siding restored, or your driveway power-washed, understanding pricing helps you plan and budget wisely.

Let’s break down the average hourly rates for window cleaning and what influences the cost—plus why Sully’s Pressure Washing stands out as a local, trusted expert for high-quality service.

The Average Hourly Rate for Window Cleaning

In Winston-Salem, NC, the typical hourly rate for professional window cleaning falls between $40 and $75. The range varies based on several key factors:

Accessibility: Are the windows on the second or third story? Do special ladders or safety equipment need to be used?
Window Size & Type: Large pane glass, French windows, storm windows, or specialty windows require more time and care.
Building Type: Cleaning a residential home differs from servicing a commercial building. Larger facilities, storefronts, or offices often require more manpower or equipment.
Condition of the Windows: If the windows haven’t been cleaned in years, expect more time for scrubbing away built-up dirt, hard water stains, or paint overspray.
Interior vs. Exterior Cleaning: Some clients only need exterior cleaning, while others opt for a full-service clean, which includes interior glass, tracks, and screens.

These variables make flat-rate pricing more common for residential window cleaning, while hourly billing is often used for complex or larger-scale commercial jobs.

Sully's Pressure Washing: Winston-Salem’s Window Cleaning Experts

Sully's Pressure Washing · What Do Most Cleaners Charge Per Hour in Winston-Salem, NC? Sully's Pressure Washing Has the Answer

While many companies charge by the hour, Sully’s Pressure Washing takes a client-first approach. Located at 324 Tree Line Dr, Winston-Salem, NC, they provide custom quotes based on your property’s needs rather than just clocking the hours.

Their goal? Offer honest, transparent pricing while delivering the highest-quality window cleaning in the area.

Whether you have a single-story home or a sprawling office complex, their experienced team ensures every window shines—without hidden fees or inflated costs.

Why Hourly Rates Don’t Tell the Full Story

You might wonder: why do hourly rates vary so much?

The answer is simple—experience and efficiency matter. A professional window cleaner with years of practice and proper tools can complete a job faster and more thoroughly than someone who lacks experience.

What takes one company three hours might only take Sully’s team two, thanks to:

Efficient workflows
Advanced tools like water-fed poles and squeegees
Safety gear and training for high-reach work
Eco-friendly, streak-free cleaning solutions

In the end, the value isn’t just about how long someone works—it’s about the results. And Sully’s Pressure Washing delivers sparkling results every time.

Commercial vs. Residential: A Quick Comparison

Residential Window Cleaning

Most homeowners in Winston-Salem can expect a flat fee ranging from $150 to $300 for a standard window cleaning job, depending on the number of windows and if interior cleaning is included.

Homes with multiple stories or hard water stains may push the price higher. However, Sully’s team evaluates every home and offers clear estimates to ensure no surprises.

Commercial Window Cleaning

For commercial buildings, pricing usually shifts to either a per-pane rate or hourly based on building size and window accessibility. Rates can range from $200 to over $1,000, especially for multi-story properties that require extra safety equipment or multiple technicians.

Sully’s Pressure Washing is fully equipped to handle commercial storefronts, office buildings, and industrial facilities—ensuring every window reflects your business’s professionalism.

What’s Included in Professional Window Cleaning?

When you hire Sully’s Pressure Washing for window cleaning, you’re not just getting someone to swipe a rag across the glass. Here’s what a full-service clean typically includes:

Interior and exterior window washing
Hard water stain removal
Screen cleaning and dusting
Window track and sill cleaning
Inspection for damage or mold buildup

They take the time to treat your windows with care, ensuring they remain in excellent condition for years to come.

How Often Should You Schedule Service?

Another key factor in budgeting for window cleaning is how frequently you plan to have it done. Most professionals recommend:

Twice per year for residential homes (spring and fall)
Quarterly or monthly for commercial buildings, especially those in high-traffic or downtown areas

Regular cleaning extends the lifespan of your windows and keeps your property looking its best. Sully’s Pressure Washing offers maintenance plans for recurring service, which can help reduce costs over time.

Local and Trusted—Why Winston-Salem Chooses Sully’s

Sully’s Pressure Washing isn’t just another cleaning company. It’s a locally owned and operated business led by a professional firefighter who brings the same level of integrity, attention to detail, and dedication to every job.

Customers choose Sully’s because of:

Reliable scheduling
Friendly, professional staff
Meticulous attention to detail
Competitive, transparent pricing
Commitment to safety and quality

Their team is trained, insured, and ready to help homeowners and businesses alike brighten up their spaces—one spotless window at a time.

Get Your Free Estimate Today

If you’re curious about how much it would cost to clean your windows—whether it’s by the hour or with a flat rate—Sully’s Pressure Washing is ready to help. They offer free, no-obligation quotes and are happy to discuss your needs over the phone or during an on-site visit.

Call (336) 936-5689 today to speak with a friendly team member and schedule your next cleaning service.

Or visit their website to learn more:
👉 https://sullyspressurewashing.com

Window Cleaning Sully’s Pressure Washing

Sully’s Pressure Washing
324 Tree Line Dr
Winston-Salem, NC 27107
📞 (336) 936-5689

Local Firefighter Owned and Operated!